Competency Based Training For Global Excellence

Hands-On Competency Based Training In Insulation Power Factor For Powertransformer

This 24-hour practical course provides you with methods and procedures used internationally. Predictive, periodic or condition based (on line diagnostics and monitoring) maintenance are basic methodologies in substation maintenance. The course is for...

Competency Based and Hands On Training On Power Quality and Harmonics

The distribution code defines power quality as the quality of the voltage, including its frequency, and the resulting current, that are measured in the Distribution System during normal conditions. Since Power Quality issues affects every consumer in...

Thermal Imaging

Seminar will focus on the following:

• Applications and benefits of infrared technology in electrical installations
• Thermal Imaging Concepts
• Practical interpretation of results, images, and targets
• Practical approach to non-invasive ma...

Protective Relaying

Protective Relaying is a vital part of any electric power system: quite unnecessary during normal operation but very important during trouble, faults and abnormal disturbances. Protective Relaying can be considered a vertical specialty with a horizon...

Arc Flash Hazard Analysis

Course Background:

Every year there are more than 3,000 disabling contact injuries resulting from preventable
electrical accidents in the workplace? Did you know that electrical accidents are 10 to 30 times more fatal compared to other workplace ...

Electrical System Protection and Coordination

Power System Analyses are an essential part of electrical power system design. Load flow analysis, short circuit analysis, and protection coordination are necessary to verify that the electrical system including the system components, are correctly s...

Technical Writing

This program will strengthen the writer’s skill to
construct progress reports, proposals and recommendation reports in a precise,
clear and objective manner.

Executive Image

Learn more about Executive presence and imaging at PAMAV

Call Handling Skills

After the program, the participants will be able to:

• know how to speak with confidence
• define what assertive communication is
• identify what the customer expects from a service
• apply competent call handling skills
• know the importance ...

Customer Centric

After the program, the participants will be able to:
 review what customer service is all about
 learn how to impact customer service by being customer
centric
 achieve customer centricity by caring for customers
 learn about positive phrase...

Managerial Decision Making, Changes and Innovation

What does it take to stand out? How do we ensure that the decision made
will help the organization help its problems, allocate resources and reach its
goal? This program will help managers understand and define tools that can
help them in their ev...

Effective Email Writing

After the program, the participants will be able to:
 use the correct genres in writing emails
 describe the functions of each section within a genre
 use grammar to effectively achieve the functions of each
section within an email genre.
 u...

Management and Supervisory Skills for Millenials

It is essential to understand what it take to jump from rank and file to a
managerial or leadership role. Understanding the concepts, methodolgy and
theories of management and leadership will help you become a better
manager.

Managing Generations in the Workplace from Boomers to Bloggers

Have you experienced frustration that you don’t seem to get how the older or the younger generation work? If you want to find ways of understanding, working, communicating and thriving in this unique work landscape, find out in this program!

Microsoft Projects 2013 Essentials

Leadership: From Rank and File to Manager

This course provides knowledge on the basic qualities of a leader, and how this aspect helps participants improve their leadership and influencing skills. Learners will also be given examples of common work conflicts and how to address these challeng...

Work Readiness

This program will help participants increase their knowledge on employability skills. It is designed to enable them to successfully demonstrate professionalism and effective communication during job interviews. This course will also be an essential t...

Hands on Competency Based Training on Partial Discharge

Our PD training is a complete and exhaustive program with
both classroom and practical sessions that give participants
the opportunity to gain an understanding of PD theories
as well as hands-on practical experience on PD testing. The
course cove...

Construction Safety and Health Course for Site Safety Officers

This comprehensive 40-hour course on Construction Safety and Health Course for Site Safety Officers is accredited by the DOLE-OHSC. It is one of the major requirements by the DOLE for accrediting Safety Practitioners/Consultants and for anyone who wa...

Construction Project Management

The course deals with the principles of managing a construction project. It includes the nature, concept, implementation, and operation of constructing infrastructure projects and the business of contracting. It covers project planning, monitoring ...

Construction Project Scheduling and Control

A 2-day seminar designed for anyone who wanted to enhanced their knowledge and skills in
construction work scheduling and control. The seminar consists of lecture, discussions, and
tabletop exercises that will help develop participants’ abilities i...

Construction Contract Management

A two day lecture presentation energized with class discussion of various issues in actual
construction wholly structured for adult learning. The presentation covers the conceptual
framework of Contract Management excerpted from the Project Managem...

Construction Project Cost Estimating, Budgeting & Control

A 2-day seminar/workshop designed to enhance the knowledge, skills and attitude of the
participants on cost management. It includes the processes (cost estimating, cost budgeting, and
cost monitoring & control) to ensure that the project is complet...

Construction Project Quality Assurance & Quality Control

This is a 2-day seminar designed for anyone who wanted to upgrade their knowledge and skills in the area of QA/QC. The seminar consists of lecture discussions, workshop, and exercises related to quality assurance and quality control of construction p...

Effective Communications in Construction

A 2-day seminar/workshop that includes the processes (plan communications, execute
communications, control communications) required to ensure timely and appropriate planning,
collection, creation, distribution, storage, retrieval, monitoring, contr...

Equipment Management Seminar

The course is designed primarily for supervisors/engineers in the private construction industry and government infrastructure agencies to equip them with technical know-how and supervisory skills in order to maximize the use of available resources.
...

Site-Fabricated Formwork Design, Assembly and removal for Maximum Re-use

A 2-day seminar/workshop developed to serve as a guide for target participants in the planning and implementation of formwork for concrete. It includes principles of design, construction & use of formworks that can have a major impact on the profitab...

Supervising Reinforcing Steel Bar Fabrication & Installation

A 2-day seminar/workshop designed for engineers who wanted to upgrade their supervisory skills
and knowledge in reinforcing steel bar construction. The course consists of lecture/discussion
and workshops covering proper rebar fabrication and instal...

Masonry/Concreting

MASONRY WORKS:

A seminar/workshop designed for construction supervisors who are interested in knowing the
standard practices in the implementation of masonry works. This seminar was developed to serve
as a guide on a project level for target pa...

Building Construction Plumbing Works for Supervisors

The course is designed primarily to make it easier for the participants to acquire the skills needed
for the plumbing craft; it discusses the proper methodologies and procedures in the preparation,
installation of pipes and fittings.
New methods a...

Supervising Electrical Installation in Building Construction (In-house Training)

This is a 2-day seminar workshop designed for engineers to
upgrade their supervisory skills and knowledge in building electrical
construction. The course consists of lecture/discussion and workshop
covering the proper electrical installation works...

Methods and Techniques in Welding Works and Inspection for Supervisors (In-house Training)

The course is designed for three days, 30% lecture and 70% practicum to give the
trainee the basic knowledge and skills in shielded metal arc welding (SMAW).
Proper setting up of equipment, electrode selection, basic welding joints, workplace
prep...

Supervising Heavy Equipment Operations During Construction (In-house Training)

The course is designed for two days, 25% lecture and 75% practicum to give the
trainee the knowledge and skills on:
- The safety practices observed on the job site.
- Proper attitude and technique in operating the equipment productively.
Heavy Eq...

Motor Tests and Control Supervisors Course (In-house Training)

This is a 3-day seminar workshop designed for engineers to
upgrade their supervisory skills and knowledge in Motor Test and
Controls. The course consists of lecture/discussion and workshop
covering the principles of operation of induction motors, ...

Safety & Traffic Control During Road Construction

A 2-day DOLE-BWC accredited advance safety seminar that tackles on how to develop and execute Traffic Control Plan by identifying the appropriate traffic control devices, safety signages, and safety personnel needed during road construction. Most of ...

One-day Construction Worker's Safety & Health Orientation

A one-day lecture using power point presentation and actual demonstration that includes the proper use and care of various PPEs, deeper understanding of fall restraint and fall arrest system, safety measures to address the various hazards in the cons...

Electrician Course For Building Construction (In-house Training)

This is a 2-day seminar/workshop designed for construction workers who want to become
proficient in building wiring installation. The course consists of lecture/discussion and hands-on practicum intended to provide the participants with the needed s...

Advanced Course for Scaffold Erectors (In-house Training)

A 1-day seminar/workshop designed for existing scaffolders of supported-type scaffolds aimed at enhancing their knowledge, skills and attitude in the proper performance of their job in accordance with industry standards and practices. It was develope...

Advanced Training Course in Tungsten Insert Gas (TIG) Welding (In-house Training)

This 5-day training/seminar is designed to provide the participants with the advanced knowledge and skills in Tungsten Inert Gas (TIG) Welding process. The course will provide participants the know-how in the proper way in setting up of welding equip...

Upgrading Course on Blocklaying & Plastering Techniques for Construction Masons ( In-house Training )

A 2-day seminar/workshop designed for existing masons of concrete masonry units aimed at enhancing their knowledge, skills, and attitude in the proper performance of their job in accordance with industry standards and practices. It was developed to s...

Heavy Equipment Operations (In-house Training)

The course is designed for two days. 25% lecture and 75% practicum to give the trainee the knowledge and skills on:
-The safety practices observed in the jobsite;
-Proper attitude and technique in operating the equipment productively.

Heavy Equi...

Heavy Equipment Maintenance (In-house Training)

The course is designed to impart to the trainee the knowledge and skills required for the different components of hydraulic system and powertrain of heavy equipment.
It consists of one-day lecture and the other day is hands-on training on exercises ...

Construction Supervisory Training and Certification Program

This five (5) day seminar-workshop entitled the Construction Supervisory Training and
Certification Program aims to upgrade the competencies of the Project Superintendents and Supervisors / Would-be supervisors focusing on the Management Functions o...

Foremanship Training Certification Program

The Construction Manpower Development Foundation (CMDF) formulated the Foremanship Training Certification Program (FTCP) which is designed to develop competent construction foremen. During this course the participants will learn the roles and respons...

Enhance Construction Manager's Training and Certification Program

In an effort to keep the construction industry, through its engineers, abreast of the most
efficient construction methodologies and management tools, CMDF developed the
Enhanced Construction Managers’ Training and Certification Program (ECOMTCP). T...

Engineer to Leader

After the program, the participants will be able to:
 Enumerate techniques to practice POLC anchored with CORE Values
 List ways to improve working with teams using DiSC

Trainers' Training and Certification Program

The Construction Manpower Development Foundation (CMDF) in coordination with the
Makati Development Corporation (MDC) formulated the Makati Development Corporation
Trainers Certification Program (MDC-TCP) which is designed to train, evaluate, and c...

Program Event Management for Training Assistants

If you conduct and organize learning events, this program is for you. The program aims to give information how your training assistants can plan, organize and improve your learning program as fulfilling events for the participants.

Coaching for Performance

This course is designed to assist the supervisor/leader on the effective way of coaching. This will heighten his understanding about self-awareness, and how this aspect will guide him in establishing trust and professional relationship with the learn...

Effective Communication

By the end of the workshop, the participants shall be able to:
I. Understand the basics of communication;
II. Communicate in English with the corr ect grammar;
III. Organize their thoughts to convey a message in a clear and concise manner;
IV. Pr...

Team Building

This program is best for:

Team members, Supervisors, Managers who want to:

• have a clearer understanding of how they can reduce conflict and miscommunication
• build rapport and cooperation; work efficiently as a team
• cope with change more...

Millennial Leadership

The challenge is that leadership theories and books were written by the Boomers for the Gen Xers. So, the Gen X are leading now as how they are taught. How do we now coach millennials to lead in this dynamic business environment? They are not the ne...

Lego Serious Play

LEGO SERIOUS PLAY is a facilitation methodology created by LEGO.

The method's goal is to cultivate expressive thinking through team building metaphors of their organizational identities and experiences using LEGO bricks

Dissolve Gas Analysis

This seminar should improve people’s knowledge of insulating oil analysis specifically DGA and Oil Quality tests

Workplace Attitude and Values Enrichment

This program designed to help the employees improve the way they do their work by first having the right mindset and attitudes towards their job and by being aware of and living their corporate and personal values.

8-HOUR OCCUPATIONAL SAFETY AND HEALTH TRAINING AND 2-HOUR TRAINER'S TRAINING FOR SO 1

8-Hour Safety and Health training & 2-Hour Trainer's Training for SO 1 is required by the Department of Labor and Employment in pursuant to Section 16 of RA No. 11058 and Section 3 of DO 198-18 — "AN ACT STRENGTHENING COMPLIANCE TO OCCUPATIONAL SAFET...

Managing a Multi Generation Workforce

The workforce now can be a source of stress or innovation. What is your organization going thru? Let us help turn the misunderstanding and stress to a workforce that can work in harmony for continuous improvement - together!